Shop By Brand

Free Live Chat Software

replacement cheap laptop batteries for Dell

Hot Pick

DVD Burner Support Blu-ray Disc UP To 50GB Storage HD

$113.95 Free Delivery
RRP: $179.99

Shop with confidence! Protect your personal data, no sharing and selling! 128-Bit SSL guarantees every transaction at MamBate.us.

Online Payments

Mambate Reviews

Review: MamBate USA Inc
"It was very easy to from the site. Delivery of my item was fast and I did not get charge for shipping."

----a shopper

More Reviews>>

Home > Surveillance Camera > Wireless Baby Monitor >

AGPtek Wireless 2-Color Camera Rechargeable Video Baby Monitor Security System

New! 1 Year Warranty

Over $100, Click for 2% Discount

List Price: $180.99
Our Price: $136.95
You Save $44.04!

!

Stock Status: In Stock

Availability: Usually Ships in 1 to 2 Business Days
Product Code: GE3

Qty:

Description

Pack Listing:

Wireless Camera x 2(purple&pink)
Wireless Receiver x 1
AC Adapter For Camera x 2
AC Adapter For Receiver x 1
Lithium Battery For Receiver x 1
Video Cable x 1
Earphone x 1

Move your mouse on the small picture to Enlarge picture

Specification:

	ITEM	Value
General	Transmission Frequency	ISM 2,400 ~ 2,483 MHz
	Transmission Power	10mW/CE; 2mW/FCC
	Unobstructed Effective Range	100m(Min.)
	Spread Spectrum	FHSS
	Modulation MODE	GMSK
	Operating Temperature	-10OC ~ +50OC / +14OF ~ +122OF
	Operatiing Humidity	15%~85%
Camera	Imaging Sensor Type	CMOS
	Picture Total Pixels	720 x 576(PAL) 720 x 480(NTSC)
	Minimum Illumination	0Lux(IR ON)
	Night Vision Distance	3m(Min.)
	View Angle	40°
	Bandwidth	1.5MHz
	Image Resolution	320 x 720 x 576(PAL)240@10fps
	Sound Detection Sensitivity	>65dB
	Consumption Current(Max.)	350mA
	Power Supply	5VDC
	Dimensions(W x D x H)	86 x 48 x 135 mm
	Weight(About)	146g
Receiver	LCD Screen Type	2.36" TFT-LCD
	Effective Pixels	480 x 234
	Receiving Sensitivity	≤-85dBm
	Consumption Current(Max.)	200mA
	Battery Working Time	5 hours
	Battery Charging Time	5 hours
	Power Supply	5VDC
	Dimensions(W x D x H)	86 x 54 x 143 mm
	Weight (About)	130 g

Installation:

Locate the camera to a desired position and then adjust it to a suitable angle.
Connect the adapter to the camera
Tip:
After the camera is powered on, touch the pole once with finger(s) to turn on the baby lights; touch again to turn off it; hold the pole and the lights will blink.
Install the accompanying Li-batteries to the battery compartment with its polarities matched.
Note:
This receiver can also be powered on by adapter.
The Li-battery will be charged after the adapter is plugged in, and the charge indicator lights in red during charging and will turn off after a full charge.
A full charge will take about 5 hours, which can power the receiverfor about 2 hours continuously.
You are recommended to have the battery fully charged before its first installation to optimize its life.
Do not burn or disassemble the Li-battery.
Do not short-circuit the battery, it may cause fire or electric shock.
Slide the power switch to the ON position.
By pressing the channel button of the receiver to switch be the same channel of the camera, and then an image will appear on the screen.
NOTE:
Generally the channel of the camera is matched to the receiver at factory. If it isn't, follow the steps below:
1. By pressing the channel button on the receiver and the check code button on back part of the camera at the same time for about 5 seconds, the receiver will automatically switch to the same channel of camera.
2. An image will appear on the screen, means the two devices are now matched to each other
Tune the volume control to a desired level.
NOTE: for more clear pictures, please connect the receiver to a monitor/TV with the supplied video cable

CAMERA CHANNEL SETUP:

The receiver supports up to 4 cameras working at the same time.Please set the channel switch on the back cover as the following diagram:

CAUTIONS:

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus
Turn off the camera/receiver if the system is not in use
The camera/receiver can only be completely disconnected from themains by unplug the adapter
Do not cut the DC power cable of the apparatus to fit with another power source
Attention should be drawn to the environment aspects of battery disposal

FCC information:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference.
this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.