| Guarantee Quality! Brand New ! 1 year warranty ! Fast Shipping ! |
Appearance:
Specifications:
| Content |
ITEM |
Value |
General |
Transmission Frequency |
ISM 2,400 ~ 2,483 MHz |
Transmission Power |
10mW/CE; 2mW/FCC |
Unobstructed Effective Range |
100m (Min.) |
Spread Spectrum |
FHSS |
Modulation MODE |
GMSK |
Operating Temperature |
-10OC ~ +50OC / +14OF ~ +122OF |
Operatiing Humidity |
15%~85% |
Camera |
Imaging Sensor Type |
CMOS |
Picture Total Pixels |
720 x 576(PAL) 720 x 480(NTSC) |
Minimum Illumination |
0Lux(IR ON) |
Night Vision Distance |
3m (Min.) |
View Angle |
40° |
Bandwidth |
1.5MHz |
Image Resolution |
320 x 720 x 576(PAL)240@10fps |
Sound Detection Sensitivity |
>65dB |
Consumption Current(Max.) |
350mA |
Power Supply |
5VDC |
Dimensions(W x D x H) |
86 x 48 x 135 mm |
Weight(About) |
146g |
Receiver |
LCD Screen Type |
2.36" TFT-LCD |
Effective Pixels |
480*234 |
Receiving Sensitivity |
≤-85dBm |
Consumption Current(Max.) |
200mA |
Battery Working Time |
5 hours |
Battery Charging Time |
5 hours |
Power Supply |
5VDC |
Dimensions(W x D x H) |
86 * 54 * 143 mm |
Weight (About) |
130 g |
Camera channel setup:
The receiver supports up to 4 cameras working at the same time.Please set the channel switch on the back cover as the following diagram:
Cautions:
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Turn off the camera/receiver if the system is not in use.
The camera/receiver can only be completely disconnected from themains by unplug the adapter.
Do not cut the DC power cable of the apparatus to fit with another power source.
Attention should be drawn to the environment aspects of battery disposal.
FCC information:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference received, including
interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.
Note: Any questions about this products, please contact us. |